ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

PCM - Engine Lacks Power After PCM Reprogram|Page 5696 > < A/T - Control Indicator Lamp Flashing/DTC P0733 Set|Page 5691
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
PCM - Engine Lacks Power After PCM Reprogram

Article No.
01-5-1

March 19, 2001

^

DRIVEABILITY - LACK OF POWER AFTER

^

POWERTRAIN CONTROL MODULE (PCM)

^

REPROGRAMMING - VEHICLES EQUIPPED WITH

^

3.0L OR 4.0L ENGINE

^

ENGINE-LACK OF POWER AFTER POWERTRAIN

^

CONTROL MODULE (PCM) REPROGRAMMING - 

^

VEHICLES EQUIPPED WITH

FORD:
2001 RANGER

ISSUE

Some 2001 3.0L and 4.0L Rangers may exhibit a lack of power IF the Powertrain Control Module (PCM) has been reprogrammed in service. The lack of
power may be caused by unintended spark retard.

ACTION

Verify the condition, and if present, reprogram the PCM to the latest level calibration. Refer to the PCM Calibration Information Chart shown.

PCM - Engine Lacks Power After PCM Reprogram|Page 5696 > < A/T - Control Indicator Lamp Flashing/DTC P0733 Set|Page 5691