Ranger 2WD V6-3.0L VIN V Flex Fuel (2001)
2. CAUTION: The solenoid clamp must be installed in the TCC and EBC solenoid grooves, shift solenoid pockets and the No. 204 plug.
Install the solenoid clamp.
1. Position the solenoid clamp on the main control valve body.
2. Install the solenoid clamp screws.
3. Connect the six solenoid electrical connectors.
1. Connect shift solenoid SSA, SSB, SSC, SSD electrical connectors.
2. Connect the torque converter clutch (TCC) solenoid electrical connector.
3. Connect the electrical pressure control (EBC) solenoid electrical connector.
4. CAUTION: Excessive pressure may break the retaining pins.
Install the main control valve body wire loom.
^
Align the retaining pins to the holes in the solenoid clamps and gently press in the main control valve body wire loom guide and protector.
5. Install the transmission fluid filter.
1. Install the transmission fluid filter.
