Ranger 2WD V6-3.0L VIN V Flex Fuel (2001)
point of the clockspring.
^
Release the clockspring locking tab. Do not allow the rotor to turn from this position.
WARNING: INCORRECT CENTRALIZATION MAY RESULT IN PREMATURE COMPONENT FAILURE. IF IN DOUBT WHEN
CENTRALIZING THE CLOCKSPRING, REPEAT THE CENTRALIZING PROCEDURE. FAILURE TO FOLLOW THIS
INSTRUCTION MAY RESULT IN PERSONAL INJURY.
CAUTION: Make sure the road wheels are in the straight-ahead position.
NOTE: If a clockspring has rotated out of center, follow through with this step.
All vehicles
3. Install the clockspring onto the steering column.
1
With the flats of the clockspring aligned to the flats of the steering column, slide the clockspring onto the steering column.
2
Engage the upper and side retaining tabs.
NOTE: Slight turning of the clockspring rotor is allowable for alignment purposes to the steering column.
4. Engage the lower clockspring retaining clip.
