Ranger 2WD V6-3.0L VIN V Flex Fuel (2001)
2. Detach the safety belt buckle and pretensioner wiring.
3. Install a shipping cap on the electrical connector.
4. Remove the grommet. Route the wiring through the seat cushion frame.
5. Unfasten the J-clip.
6. Using special tool 501-010, remove the bolt.
7. Remove the safety belt buckle and pretensioner.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS AND
NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.