Ranger 2WD V6-3.0L VIN V Flex Fuel (2001)
Band: Adjustments
Front Band Adjustment
Special Tools
Special Tool(s)
1. Raise the vehicle on a hoist.
2. Disconnect the shift cable.
1. Disconnect the shift cable from the manual control lever.
2. Disconnect the shift cable from the bracket.
3. CAUTION: Do not allow front band adjustment screw to back out. Band strut can fall out of position.
CAUTION: Throw the locknut away. The locknut is not reusable for assembly.
Remove and discard the locknut.
4. CAUTION: Install, but do not tighten, a new locknut on the band adjustment screw. Apply petroleum jelly to the locknut seal.