Ranger 2WD V6-3.0L VIN V Flex Fuel (2001)
14. Using the special tool, install the new differential bearings.
15. Position the differential assembly, including the differential bearing cups and differential bearing shims in the differential housing. Tighten bearing
caps to specification.
16. Position the special tool.
1. Rotate the differential case to verify that the differential bearings have seated correctly.
2. Position the special tool.
17. Measure the differential case runout.
^
If the runout does not exceed the specification, use the new differential bearings for assembly.
^
If the runout exceeds the specification, install a new differential case.
Installation
All axles