Ranger 2WD V6-3.0L VIN V Flex Fuel (2001)
3. NOTE: The differential housing cover must be installed within 15 minutes of application of the silicone, or new sealant must be applied. If
possible, allow one hour before filling with lubricant to make sure the silicone sealant has correctly cured.
Install the differential housing cover.
1. Install the differential housing cover.
2. Install the 10 differential housing cover bolts.
4. CAUTION: For Traction-Lok axles, before filling the rear axle with lubricant, first fill the rear axle with 118 ml (4 oz.) of additive friction
modifier.
NOTE: Service refill capacities are determined by filling the rear axle with the specified lubricant to the level shown in the illustration.
Fill the rear axle with 2.4 liters (5 pints) with the specified lubricant.
5. Lower the vehicle.
