Ranger 2WD V6-3.0L VIN V Flex Fuel (2001)
3. NOTE: If possible, allow one hour before filling the axle with lubricant to allow the silicone sealant to cure.
Install the differential housing cover.
1. Position the differential housing cover.
2. Install the bolts.
4. CAUTION: when filling a Traction-Lok axle with new lubricant, first fill the axle with 118 ml (4 oz.) of friction modifier.
NOTE: Service refill capacities are determined by filling the rear axle to the level shown.
Fill the rear axle with approximately 2.4 liters (5.0 pints) of rear axle lubricant and install the fill plug.
5. Lower the vehicle.
