Ranger 2WD V6-4.0L (2010)
Body / Frame Mount Bushing: Description and Operation
Frame and Body Mounting
Frame
NOTE: Four-Wheel Drive (4WD) short wheelbase shown, all others similar.
The frame consists of 2 steel channel rails, a rear crossmember, a number of additional support crossmembers and a front crossmember.
The No. 1A (Four-Wheel Drive (4WD) only) and the No. 1 crossmembers are welded to the frame side rails. The remaining frame crossmembers are
riveted and/or bolted into place.
For any frame repair, refer to Frame.
Front End Sheet Metal (FESM) Mounting
