Ranger 2WD V6-4.0L (2010)
9. Remove the 6 pushpins and the RH lower splash shield.
10. Remove the RH hydraulic timing chain tensioner.
-
Discard the washer.
11. Install the Timing Chain Tensioner.
12. NOTICE: The RH camshaft sprocket is a LH-threaded bolt. Turning the bolt in the wrong direction can damage the bolt.
Using the Torque Wrench Extension and the Camshaft Sprocket Nut Socket, tighten the bolts.
1. Tighten the Camshaft Sprocket Holding Tool top 2 clamp bolts to 10 Nm (89 lb-in).
2. Using the Torque Wrench Extension and the Camshaft Sprocket Nut Socket, tighten the camshaft bolt to 85 Nm (63 lb-ft).
-
Calculate the correct torque wrench setting for the above torque.
13. Remove the Timing Chain Tensioner.
