Ranger 2WD V6-4.0L (2010)
25. NOTE: Install a new washer on the tensioner.
Install the LH hydraulic timing chain tensioner.
-
Tighten to 44 Nm (32 lb-ft).
26. Remove the Camshaft Sprocket Holding Tool, the Adapter for 303-564, the Camshaft Holding Tool and the Adapter for 303-577 from the LH
cylinder head.
27. Remove the Crankshaft TDC Timing Tool.
28. If equipped, position the A/C hose and install the nut.
-
Tighten to 20 Nm (177 lb-in).
29. Install the camshaft roller followers. For additional information, refer to Camshaft Roller Follower See: Rocker Arm Assembly/Service and
Repair/Removal and Replacement/Camshaft Roller Follower.
