Ranger 2WD V6-4.0L (2010)
5. Using a clean shop towel, wipe away any excess lubricant from the tensioner and pulley. Use appropriate cleaner to remove excess WD-40(R) from
the pulley so it does not get on the belt.
6. Install accessory drive belt tensioner. Refer to WSM, Section 303-05.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
110207A
2010 Explorer,
0.4 Hr.
Mountaineer And Explorer
Sport Trac 4.0L: Diagnose,
Remove, Lubricate And
Reinstall Drive Belt
Tensioner Following
Service Procedure (Do Not
Use With Any Other Labor
Operations)
110207A
2010-2011 Ranger 4.0L:
0.6 Hr.
Diagnose, Remove,
Lubricate And Reinstall
Drive Belt Tensioner
Following Service
Procedure (Do Not Use
With Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
6B209
42
Disclaimer