Ranger 2WD V6-4.0L (2010)
Exhaust Manifold: Specifications
Install 6 new LH exhaust manifold studs.
Tighten to....................................................................................................................................................................................................12 Nm (106 lb-in).
Position a new gasket and the exhaust manifold and install 6 new nuts.
Tighten to.......................................................................................................................................................................................................22 Nm (16 lb-ft).
Install 6 new RH exhaust manifold studs.
Tighten to....................................................................................................................................................................................................12 Nm (106 lb-in).
Position a new gasket and the RH exhaust manifold and install 6 new nuts.
Tighten to.......................................................................................................................................................................................................22 Nm (16 lb-ft).
