Ranger 2WD V6-4.0L (2010)
Housing Assembly HVAC: Service and Repair
Plenum Chamber
Plenum Chamber
Removal and Installation
1. Remove the instrument panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
2. Remove the evaporator core housing. For additional information, refer to Evaporator Core Housing See: Evaporator Core Housing.
3. Remove the 4 plenum chamber nuts and the plenum chamber.
-
To install, tighten to 4 Nm (35 lb-in).
4. To install, reverse the removal procedure.
