Ranger 2WD V6-4.0L (2010)
Yes
INSTALL a new SJB. REFER to Body Control Systems. TEST the system for normal operation.
No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. CLEAR the DTCs. REPEAT the
self-test.
-------------------------------------------------
B17 CHECK FOR CORRECT IC OPERATION
-
Disconnect all the IC connectors.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins
-
Connect all the IC connectors and make sure they seat correctly.
-
Operate the system and verify the concern is still present.
-
Is the concern still present?
Yes
INSTALL a new IC. REFER to Body Control Systems. TEST the system for normal operation.
No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. CLEAR the DTCs. REPEAT the
self-test.
-------------------------------------------------
B18 CHECK FOR CORRECT 4X4 CONTROL MODULE OPERATION
-
Disconnect all the 4X4 control module connectors.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins
-
Connect all the 4X4 control module connectors and make sure they seat correctly.
-
Operate the system and verify the concern is still present.
-
Is the concern still present?
Yes
INSTALL a new 4X4 control module. REFER to Body Control Systems. TEST the system for normal operation.
No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. CLEAR the DTCs. REPEAT the
self-test.
-------------------------------------------------
Pinpoint Test C: The Interior Lamp Does Not Turn On With One Door Open
Interior Lighting
Pinpoint Test
