Ranger 2WD V6-4.0L (2010)
Fuel Tank Mounting Straps: Service and Repair
Fuel Tank Support Straps
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. If equipped, remove the 4 skid plate nuts and the skid plate.
-
To install, tighten to 30 Nm (22 lb-ft).
3. Support the fuel tank.
4. Remove the 2 fuel tank support strap bolts and fuel tank support straps.
-
To install, tighten to 47 Nm (35 lb-ft).
5. To install, reverse the removal procedure.