Ranger 2WD V6-4.0L (2010)
16. Remove the bolt from the front of the LH cylinder head which holds the harness bracket in place.
-
To install, tighten to 5 Nm (44 lb-in).
17. Release the battery cable locator from the generator bracket.
18. Disconnect the generator electrical connector.
19. Position the generator B+ protective cover aside, remove the nut and position the battery cable generator B+ terminal aside.
-
To install, tighten to 17 Nm (150 lb-in).
20. Remove the battery cable.
21. To install, reverse the removal procedure.
