Ranger 2WD V6-4.0L (2010)
Installation
1. NOTICE: Do not damage the lower ball joint boot when installing the C-Frame and Screw Installer/Remover and Ball Joint
Installer/Remover.
NOTE: Clean and inspect the lower arm ball joint bore for damage before installing a new ball joint.
NOTE: Make sure the new lower ball joint snap ring is fully seated.
Using the C-Frame and Screw Installer/Remover and Ball Joint Installer/Remover, install the lower ball joint.
2. Install the wheel spindle. For additional information, refer to Wheel Spindle See: Front Steering Knuckle/Service and Repair.