Ranger 2WD V6-4.0L (2010)
21. If equipped, position the servo heat shield over the servos and clip it to the pan rail.
-
Tighten to 10 Nm (89 lb-in).
22. NOTE: Start with a minimum of 3.7L (4 qt) transmission fluid.
Fill transmission with transmission fluid to the correct fluid level.
Solenoids - Shift, Torque Converter Clutch, Electronic Pressure Control
Solenoids - Shift, Torque Converter Clutch, Electronic Pressure Control
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the transmission fluid pan and filter. For additional information, refer to Fluid Pan, Gasket and Filter See: Fluid Filter - A/T/Service and
Repair/Fluid Pan, Gasket and Filter.
