Ranger 2WD V6-4.0L (2010)
-
Inspect all valves and plugs for burrs.
-
Inspect all mating surfaces for burrs or distortion.
-
Inspect all springs for distortion.
-
Check all valves and plugs for free movement in their respective bores.
-
Valves and plugs, when dry, must fall from their own weight into their respective bores.
-
Roll the manual valve on a flat surface to check for a bent condition.
3. Clean and inspect the EPC solenoid screens.
4. Remove and install new shift solenoid O-rings.
5. Clean and inspect the TCC solenoid.
6. Install the 4 main control valve body check balls.
7. Install the dark color plastic converter relief valve and spring.
8. Install the extension housing lube orifice.
