Ranger 2WD V6-4.0L (2010)
6. Disconnect the clutch master cylinder rod from the clutch pedal arm.
7. Remove the CPP switch.
-
Lift the upper cover from the lock tabs and pull the upper cover up.
-
Rotate and remove the CPP switch from the clutch master cylinder rod.
8. Remove the clutch reservoir.
9. Remove the 3 pushpins, 4 bolts, 4 screws and the inner fender splash shield.
10. Unclip the hydraulic tube-to-frame retainer.
11. Unlock and remove the clutch master cylinder assembly.
