Ranger 2WD V6-4.0L (2010)
Differential Cover: Service and Repair
Rear Drive Axle/Differential - Ford 7.5-Inch Ring Gear
Differential Housing Cover
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove 2 nuts and position the parking brake cable and bracket aside.
3. Remove the differential housing cover.
1. Remove the 10 differential housing cover bolts and drain the lubricant from the rear axle housing.
2. Remove the differential housing cover.
Installation
