Ranger 4WD L4-122 2.0L SOHC (1984)
Figure 14 - After Change
To resolve this condition, the following procedure is recommended. Remove the electric solenoid (E1TE- 9C915-BA) and replace it with a mechanical
purge control valve (9B963) and a vacuum delay valve (12A- 091). Add a "T" fitting on the hose coming from the EGR valve and route the vacuum
signal to the mechanical purge control valve and the vacuum delay valve. Hose routing is shown on the schematics (Figures 13 and 14).
Authorized Modifications Decal
Obtain an Authorized Modifications Decal and list the date, dealer number, and summary of alterations performed. Select a prominent place adjacent to
the Vehicle Emission Control Information Decal suitable for installing the Authorized Modifications Decal. Clean the area, install the decal, and cover it
with a clear plastic decal shield.
PART NUMBER
PART NAME
CLASS
E3TZ-9B963-A
Purge Control Valve
C
E3AZ-12A091-E
Vacuum Delay Valve
R
373846-S
3/16" Vacuum Tee
BR
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP9915A85
TIME:
0.4 Hr. DLR. CODING: Basic Part No. 9C915 - Code: M2