ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air/Fuel Mixture > < Fuel/Ignition - Cold Start Stall/Stumble|Page 2458
Page 1
background image

Idle Speed: Adjustments

1984-86  2.0L, 2.3L, adjust hex rod at end of TSP with all vacuum hoses connected.  To set fast idle, disconnect and plug the EGR vacuum hose.

2.2L diesel, turn the 10-mm bolt on the injection pump to set curb idle.  To set fast idle, pull out choke fully and adjust the screw on the fast idle linkage.

Air/Fuel Mixture > < Fuel/Ignition - Cold Start Stall/Stumble|Page 2458