Ranger 4WD L4-134 2.2L DSL (1983)
Front Crankshaft Seal: Service and Repair
Fig. 7 Front oil seal removal
Fig. 8 Front oil seal installation
1.
Disconnect ground cables from both batteries.
2.
Remove engine cooling fan and fan shroud.
3.
Remove A/C compressor and/or power steering pump drive belt, if equipped.
4.
Remove water pump and alternator drive belt.
5.
Remove crankshaft pulley lock bolt using tool No. T83T-6316-D or equivalent.
6.
Remove crankshaft pulley using a suitable puller.
7.
Remove front oil seal using tool No. T72J-6700 or equivalent, Fig. 7.
8.
Reverse procedure to install, using tools shown in Fig. 8.
