Ranger 4WD L4-140 2.3L SOHC (1984)
Fig. 2 Front & rear engine mounts. 4-140
FRONT
1.
Remove nuts from top of insulator brackets.
2.
Raise and support vehicle, then lift engine until it clears mounts.
3.
Remove attaching screws and mounts.
4.
Reverse procedure to install. Refer to Figs. 1 and 2 for torque specifications.
REAR
1.
Raise and support vehicle.
2.
Remove the two nuts attaching rear insulator to engine support, Figs. 1 and 2.
3.
Using a suitable jack and wood block placed between engine and jack, raise transmission.
