Ranger 4WD L4-140 2.3L SOHC (1984)
^
Procure locally: (1) enough hardware cloth with 1/4" squares or smaller in it to fabricate grille screens (See Figure 14 shown in the center of this
TSB, for a pattern) and (2) 1 oz. of two-part epoxy.
^
Cut the hardware cloth to size, using the pattern (Figure 14).
^
Color coat the screens to match the body color.
^
Cut any small electric wires into 4" lengths or use plastic bag ties (approx. 20) to be used to position the screens securely.
