Ranger 4WD L4-140 2.3L SOHC (1984)
Automatic Locking Hub Installation
13. Install the automatic locking hub assembly over the spindle by lining up the three legs in the hub assembly with three pockets in the cam assembly.
Install the retainer washers
14. Install the wheel and tire assembly. Install and tighten lugnuts to specifications.
15. Final end play of the wheel on the spindle should be 0.02-0.08 mm (0.001-0.003 in).
With Manual Locking Hubs
Fig. 5 Manual Locking Hub
CAUTION: Wheel bearing lubricant is a lithium-base grease. Sodium-base grease is not compatible with lithium-base grease and should not be
intermixed. Therefore, do not lubricate front wheel bearings without first identifying the type of original wheel bearing lubricant. Usage of incompatible
bearing lubricants may result in premature lubricant breakdown.
