Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
Front Fender: Service and Repair
FENDER
Removal and Installation
1. Remove the front bumper.
2. Remove the parking lamp assembly.
3. If equipped, remove the wheel splash guard.
4. CAUTION:
-
Remove the electrical connector locators from the splash shield prior to removal.
-
On the RH splash shield, disconnect the vacuum lines from the vacuum storage reservoir.
Remove the splash shield.
1. Remove the screws.
2. Remove the pushpin.
3. Remove the bolts.
4. Remove the splash shield.
5. Remove the front fender cowl side sound absorber.