Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
7. Remove the lower radiator hose.
8. NOTE: To avoid disturbance to the transmission oil cooler fitting, use of a backup wrench is recommended.
Disconnect the two transmission cooling lines, if equipped.
9. Remove the screws and tilt the radiator back and lift it directly upward.
Installation
1. Position the radiator into the engine compartment and install the bolts.
2. NOTE: To avoid disturbance to the transmission oil cooler fitting, use of a backup wrench is recommended.
Connect the two transmission cooling lines to the radiator oil cooler fittings if equipped.
3. NOTE: Reinstall the constant tension clamps in the same position from where they were removed.
