Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
Connecting Rod: Specifications
Connecting Rod Bolt
Install the connecting rod caps.
Install the nuts.
^
Tighten the nuts in pairs in three steps.
1. Tighten the nuts finger-tight until flush with the bolts.
2. Tighten the nuts to 34 - 41 Nm (26 - 30 ft. lbs.).
3. Tighten the nuts to 41 - 49 Nm (31 - 36 ft. lbs.).