Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
Camshaft Oil Seal: Service and Repair
Camshaft Oil Seal
Special Tool(s)
Removal
1. Remove the timing belt outer cover.
2. Remove the timing chain/belt.
3. NOTE: The camshaft and oil pump shaft seals are replaced in the same manner with the same tools.
Install the Cam Sprocket Holder/Removing Tool.
^
Remove the bolt.
^
Remove the camshaft sprocket.
4. Install the Camshaft Seal Remover on the seal.