Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
5. Remove the pin-type retainers and remove the top seal.
6. Remove the screws and the condenser core.
NOTE: It may be necessary to remove the radiator from the mounting saddles to provide clearance for the condenser core removal.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the refrigerant system with the correct amount of clean PAG oil or equivalent. See: Refrigerant Oil Addition.
^
Install new O-ring seals lubricated in clean PAG oil or equivalent.
2. Evacuate, leak test, and charge the refrigerant system.
