Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
Timing Belt: Service and Repair
Timing Drive Components-Timing Belt
Special Tool(s)
Removal
1. Disconnect the battery ground cable.
2. Remove the exhaust side spark plugs.
3. Remove the outer timing belt cover.
4. Remove the crankshaft pulley. Remove the bolt.
^
Remove the crankshaft pulley.
5. Rotate the crankshaft until the number 1 piston is at Top Dead Center (TDC).
6. CAUTION: If you attempt to remove the belt without loosening both timing belt tensioner adjusting bob and spring pivot bolt, damage to
Camshaft Belt Tensioner Tool could occur when attempting to relieve belt tension.