Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
6. Remove the EVAP canister bracket.
INSTALLATION
1. To install, reverse the removal procedure.
^
Carry out the Leak Test. See: Testing and Inspection/Component Tests and General Diagnostics/Evaporative Emission System Leak Test
^
Carry out the evaporative emission repair verification drive cycle. See: Testing and Inspection/Component Tests and General
Diagnostics/Evaporative Emission Repair Verification Drive Cycle
NOTE: Lubricate all O-ring seals with O-ring seal lubricant.