Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
6. Remove the screws and the digital TR sensor.
Installation
1. Install the digital TR sensor.
1. Position the digital TR sensor.
2. Loosely install the screws.
2. CAUTION: Tightening one screw before tightening the other can cause the sensor to bind or become damaged.
NOTE: The manual lever must be in the neutral position.
Using the special tool, align the digital TR sensor and tighten screws in an alternating sequence.
3. Install the manual control outer lever.
1. Install the manual control outer lever.
2. Install the manual control outer lever nut.