ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Power Steering Bleeding|Service and Repair|Page 7285 > < Power Steering Bleeding|Service and Repair
Page 2
background image

4. Using the special tool, apply maximum vacuum and maintain it for a minimum of three minutes with the engine speed set at idle.
5. Release the vacuum and remove the special tool.

6. CAUTION:  Do not overfill the reservoir.

Check the fluid level. If necessary, fill the reservoir to the proper level.
-

Use Motorcraft MERCON Multi-Purpose ATF XT-2-QDX or MERCON equivalent.

7. Reinstall the special tool. Apply and maintain maximum vacuum.

8. CAUTION:  Do not hold the steering wheel against the stops for more than three to five seconds at a time. Damage to the power steering pump

will occur.

Cycle the steering wheel fully to the left and right every 30 seconds for approximately five minutes.

Power Steering Bleeding|Service and Repair|Page 7285 > < Power Steering Bleeding|Service and Repair