Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
Stabilizer Bar: Service and Repair
Front
Bar and Link
Removal
1. Raise the vehicle on a hoist.
2. Remove the wheel and tire assembly.
3. Remove the front stabilizer bar link nuts from the front suspension lower arms.
4. Remove the front stabilizer bar link bolts and the front stabilizer bar links.
5. Remove the front stabilizer bar.
1
Remove the four bolts and two brackets.
2
Remove the front stabilizer bar.
3
Remove the stabilizer bar insulator.
Installation
NOTE: In the event the self-tapping bolts cannot be installed in the frame, there is a kit available with flag nuts; consult your parts department for
further information.