Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
7. CAUTION: The TCC solenoid and converter modulator valve can pop out of its bore. This can damage the solenoid or converter modulator
valve.
Remove the EBC, SSB, and CCS solenoids.
1. Remove the wire harness.
2. Remove the screws.
3. Remove the solenoid clamp.
4. Remove the EBC, SSB, and CCS solenoids.
8. CAUTION: Do not pry on the other wires or damage to the connector case surface can result.
Disconnect the turbine shaft speed (TSS) sensor electrical connector from the transmission case (16-pin) electrical connector.
1. Disconnect the TSS sensor electrical connector.
2. Remove the TSS sensor wire locator.
9. CAUTION: Do not overstretch the retaining spring.
Remove the transmission case (16-pin) electrical connector retaining spring.