ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
A/T - No 2nd, 3rd Gear/No Engine Braking/DTC's Set|Page 5700 > < A/T - No 2nd, 3rd Gear/No Engine Braking/DTC's Set|Page 5698

Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)

Page 5
background image

5. NOTE:  The main control valve body screws will be tightened in later steps.

Loosely install two M6 x 35 mm (1.4 inch) screws.

6. Remove the Valve Body Aligner.

7. NOTE:  The main control valve body screws will be tightened in later steps.

Loosely install the M6 x 30 mm (1.2 inch) screw.

8. NOTE:  The main control valve body screws will be tightened in later steps.

Loosely install the sixteen M6 x 40 mm (1.6 inch) main control valve body screws.

A/T - No 2nd, 3rd Gear/No Engine Braking/DTC's Set|Page 5700 > < A/T - No 2nd, 3rd Gear/No Engine Braking/DTC's Set|Page 5698