Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
2. Install TSS sensor wire into the locator.
4. CAUTION: Do not overstretch the retaining spring.
Install the transmission case (16-pin) electrical connector retaining spring.
5. Install the EBC and SSB solenoids.
6. CAUTION: The solenoid clamp must be installed in the TCC and EBC solenoid grooves, shift solenoid pockets and the No. 204 plug.
Install the solenoid clamp.
1. Position the solenoid clamp on the main control valve body.
2. Install the solenoid clamp screws.
