Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
11. Install the transmission fluid pan.
1. Position a new transmission fluid pan gasket on the transmission fluid pan.
2. Align and install the transmission fluid pan.
^
Loosely install the screws.
12. Tighten the transmission fluid pan screws.
13. Connect vehicle harness to transmission (16-pin) connector. Make sure lock is fully engaged.
14. Lower the vehicle.
15. Connect the battery ground cable.
16. Fill the transmission to the correct fluid level and check for correct transmission operation.
^
Use MERCON V Automatic Transmission Fluid XT-5-QM meeting Ford specification MERCON V.