Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
1. Lubricate the transmission input shaft pilot bearing.
^
Use front axle grease.
2. Adjust the clutch pressure plate.
1. Using a suitable press, press downward on the fingers until the adjusting ring moves freely.
2. Rotate the adjusting ring counterclockwise to compress the tension springs. Hold the adjusting ring in this position.
3. Release the pressure on the fingers. The adjusting ring will stay in the reset position.
3. Using the special tool, position the clutch disc on the flywheel.
