Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
9. Using the special tools, measure the ring gear backlash.
^
If the backlash is within specification, go to Backlash within specification. The specification shown is the full allowable range.
^
If a zero backlash condition occurs, go to Zero backlash.
^
If the backlash is not within specification, go to Backlash not within specification.
Zero backlash
10. If a zero backlash condition occurs, add 0.51 mm (0.020 inch) to the RH side and subtract 0.51 mm (0.020 inch) from the LH side to allow
backlash indication. Check the backlash. Repeat Measuring backlash.
Backlash not within specification
