Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
1. CAUTION: If installing a new anti-lock speed sensor ring, align the notch on the case flange and the tab on the anti-lock speed sensor ring.
Position the differential ring gear, the anti-lock speed sensor ring, and the differential case. Align the bolt holes by starting two bolts through the
holes in the differential case and the differential ring gear. Press the new anti-lock speed sensor ring, if removed, and the differential ring gear on
the differential case.
2. Install the bolts.
^
Apply stud and bearing mount to the bolt threads.
3. With the pinion depth set and pinion installed, place the differential assembly in the differential housing.
4. Install a differential bearing shim on the left side.
