Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
1. Position the special tools and the inner and outer bearing cups in their respective bores.
1. After placing the inner and outer bearing cups in their bores, place the special tool (inner) on the inner pinion bearing cup.
2. Place the special tool (outer) on the outer pinion bearing cup.
3. Install the special tool.
2. Tighten the special tool to seat the pinion bearing cups into their bores.
Using 205-024,205-153, and 205-D055
3. Using the special tools, drive the outer pinion bearing cup into the axle housing.
4. Using the special tools, drive the inner pinion bearing cup into the axle housing.
Setting pinion depth
5. CAUTION: Whenever new cups are installed, new pinion bearings must also be installed.
