Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
2. CAUTION: Installation without the correct tool can result in early seal failure.
CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove the seal and install a new seal.
Using the special tool, install the rear axle drive pinion seal.
3. Install the pinion flange.
7.5 Inch Ring Gear Rear Drive Axle
Special Tools
Special Tool(s)
Materials
Removal
1. Remove the pinion flange.
2. Pry up on the metal flange of the rear axle drive pinion seal. Install gripping pliers and strike with a hammer until the rear axle drive pinion seal is
removed.
Installation
1. Lubricate the new rear axle drive pinion seal with grease.