Ranger 4WD L4-2.3L VIN D (2002)
Brake Pedal Assy: Service and Repair
Brake Pedal and Bracket - Manual Transmission
Pedal and Bracket - Manual Transmission
Removal and Installation
1. NOTE: When removing the stoplight switch, retain the bushing and hairpin clip. They will be required for installation.
Disconnect the brake master cylinder push rod.
1. Remove the hairpin clip.
2. Separate the stoplight switch and the brake booster push rod from the brake pedal pin.
3. Remove the brake booster push rod bushing.
2. Disconnect the clutch pedal position (CPP) switch.
3. NOTE: The clutch pedal master cylinder push rod retaining clip is not reusable.
Disconnect the clutch pedal master cylinder push rod.
