Ranger 4WD L4-2.3L VIN D (2002)
Coolant Outlet: Service and Repair
Coolant Outlet Pipe Front
Coolant Outlet Pipe Front
Removal and Installation
1. Drain the cooling system.
2. Disconnect the radiator upper hose.
3. Disconnect the degas bottle vent hose.
4. Disconnect the degas bottle bottom hose.
5. Remove the mounting bolts and remove the front coolant outlet tube.
6. NOTE: Inspect the two O-rings. Install new O-rings if necessary.
To install, reverse the removal procedure.
