Ranger 4WD L4-2.3L VIN D (2002)
Engine Mount: Service and Repair
Engine Support Insulators
Special Tool(s)
Removal
1. Remove the front springs.
2. Remove the pushpins and position the right inner fender splash shield out of the way.
3. Lower the vehicle.
4. NOTE: Right-hand shown, left-hand similar.
Remove the RH and LH engine support insulator nuts.
5. Install the Lifting Eyes.
6. Raise the engine with the 3-Bar Engine Support Kit.
7. Raise and support the vehicle.
8. NOTE: Right-hand shown, left-hand similar.
